Electrical support
Power distribution, lighting and photometrics, low-voltage, solar PV and EV charging, with the scope set by your region.

In shortSYMATEQ supports electrical projects with drawings, Revit models and lighting models in every region, and with electrical design assist and calculations in the US, Canada, Australia and New Zealand, to the NEC, CSA C22.1 and AS/NZS 3000 as the region requires.
Who this is for
This page is for the electrical side of any project: service and panels, lighting, low-voltage systems, solar PV, battery storage, EV charging and backup power.
What we do
- Panel schedules, single-line diagrams and plans
- Service and feeder sizing, panel loads, voltage drop and conductor sizing where offered
- Lighting layouts and photometric models in DIALux and AGi32
- Solar PV, battery storage and EV charging layouts
- Revit electrical models and sheets
What you send
- Your design intent, sketches or markups
- The architect's backgrounds or model
- Your template and standards
- The code and edition the project is under
What you get
- Drawings and models in your template
- Calculations written out for your review, where offered in your region
- A scope, a date and a price before work starts
Where it is offered
What we prepare depends on your region. Each region has its own support page.
| United States | Design assist and calculations to the NEC (NFPA 70) edition the project is under, COMcheck reports, permit-ready lighting reports, drafting and Revit modeling. |
| Canada | Design assist and calculations. We design to the codes adopted by the local authority having jurisdiction: CSA C22.1 with provincial amendments for electrical, and NECB or ASHRAE 90.1 for energy, as the province or city requires. |
| Australia and New Zealand | Electrical design assist and calculations to AS/NZS 3000, AS/NZS 1680 and, in Australia, NCC Section J (J6 and J7), plus drafting and Revit modeling. |
| United Kingdom, Ireland, Netherlands, Finland, Middle East | Electrical drafting, Revit modeling and DIALux and AGi32 lighting models, drawn from your engineer's design. |
How a job runs
Discovery and consultation
A short conversation about the project, the deadline, the codes and what matters most to you. No obligation.
Scope and onboarding
You get a clear scope, timeline and price. We sign an NDA if you need one, set up secure file transfer and take on your Revit and CAD templates and layer standards.
Engineering and modeling
We do the design assist, calculations, drawings and Revit models, built to the codes of your region.
Coordination and QA/QC
We coordinate the trades in Navisworks and check the set against a QC list before it leaves us.
Delivery and support
You get clean, coordinated, permit-ready sheets on the agreed date, with quick turnaround on revisions.
Questions about electrical support
What do you calculate for electrical?
Service and feeder sizing, panel loads, voltage drop and conductor sizing, and lighting calculations: NEC Article 220 in the US, AS/NZS 3000 maximum demand and AS/NZS 3008 cable sizing in Australia and New Zealand.
What do you prepare outside those regions?
In the UK, Ireland, the Netherlands, Finland and the Middle East we prepare electrical drawings, Revit models and lighting models from your engineer's design.
Related support
Design assist support
We prepare the layouts, the calculations and the drawings. Your licensed engineer reviews, seals and issues them.
OpenDIALux support
Interior lighting layouts and photometric models by room, drawn into your set.
OpenDrafting support
Plans, risers, schedules and details in Revit or AutoCAD, in your title blocks, layers and standards.
OpenRevit support
Models, sheets and schedules built in your template, and an add-in that brings NEC calculators into Revit.
OpenReviewed by the SYMATEQ team. Last reviewed: 16 November 2026