Electrical, mechanical and plumbing, wherever your project is +1 407-751-1755WhatsAppTeams callLinkedIninfo@mep.symateq.com

Fire protection support

Sprinkler layouts, fire alarm device layouts, hydraulic calculation support and Revit models for US projects, prepared for your licensed engineer to review and issue.

Ductwork, cable tray and pendant lights above a ceiling

In shortSYMATEQ supports US projects with fire protection and fire alarm design assist: sprinkler head layouts and hydraulic calculation support to NFPA 13, fire alarm device layouts to NFPA 72, and standpipe and pump layouts to NFPA 14 and 20. Your licensed engineer reviews, approves and issues the work.

Who this is for

This page is for engineers, contractors and architects on US projects who need the sprinkler and fire alarm layouts prepared on the reflected ceiling plan and coordinated with the electrical design.

What we do

  • Sprinkler head layouts, pipe routing and sizing support, hydraulic calculation support
  • Fire alarm device layouts, zone and riser diagrams, device schedules
  • Standpipe and fire pump room layouts
  • Revit fire protection and fire alarm models
  • Clash detection against structure, ducts and cable tray

What you send

  • The reflected ceiling plan and the architect's model
  • The electrical design for the alarm circuits
  • The NFPA edition the project is under

What you get

  • Layouts and diagrams for your review
  • A model that coordinates with the other trades
  • A scope, a date and a price before work starts

Where it is offered

What we prepare depends on your region. Each region has its own support page.

United StatesFire protection and fire alarm design assist is offered for projects in the United States, always for your licensed engineer or contractor to review, approve and issue.

How a job runs

  1. Discovery and consultation

    A short conversation about the project, the deadline, the codes and what matters most to you. No obligation.

  2. Scope and onboarding

    You get a clear scope, timeline and price. We sign an NDA if you need one, set up secure file transfer and take on your Revit and CAD templates and layer standards.

  3. Engineering and modeling

    We do the design assist, calculations, drawings and Revit models, built to the codes of your region.

  4. Coordination and QA/QC

    We coordinate the trades in Navisworks and check the set against a QC list before it leaves us.

  5. Delivery and support

    You get clean, coordinated, permit-ready sheets on the agreed date, with quick turnaround on revisions.

Questions about fire protection support

Do you design the system?

We prepare the layouts, calculation support and models. Your licensed engineer or fire protection contractor reviews, approves and issues them.

Which standards do you use?

NFPA 13 for sprinklers, NFPA 72 for fire alarm, and NFPA 14 and 20 for standpipes and pumps, in the edition adopted for the project.

Reviewed by the SYMATEQ team. Last reviewed: 16 November 2026

Start a project

Have a project in mind?

Tell us the discipline, the code and the deadline. We reply with a price and a date, usually within one business day.

Used only to reply to you. Privacy