Electrical, mechanical and plumbing, wherever your project is +1 407-751-1755WhatsAppTeams callLinkedIninfo@mep.symateq.com

Mechanical support

Heating and cooling loads, ducts and ventilation, equipment schedules and Revit mechanical models, with the scope set by your region.

Spiral ductwork in a ceiling

In shortSYMATEQ supports mechanical projects with HVAC load calculations, duct and ventilation sizing, equipment schedules and design assist in the US and Canada, and with mechanical drawings and Revit models in every region.

Who this is for

This page is for the mechanical side of any project: heating, cooling, ventilation, ducts and equipment. Your engineer selects and approves the equipment.

What we do

  • HVAC load calculations, duct sizing and ventilation calculations where offered
  • Equipment schedules prepared from the results
  • Mechanical plans, sections and details
  • Revit mechanical models coordinated with the other trades
  • COMcheck reports for US projects

What you send

  • Your design intent, sketches or markups
  • The architect's backgrounds or model
  • Your template and standards
  • The code and edition the project is under

What you get

  • Drawings and models in your template
  • Calculations written out for your review, where offered in your region
  • A scope, a date and a price before work starts

Where it is offered

What we prepare depends on your region. Each region has its own support page.

United StatesDesign assist, load calculations and sizing to the edition the project is under, equipment schedules, COMcheck, drafting and Revit modeling.
CanadaDesign assist and calculations to the codes adopted by the local authority having jurisdiction, plus drafting and Revit modeling.
Australia and New ZealandMechanical drafting and Revit modeling.
United Kingdom, Ireland, Netherlands, Finland, Middle EastMechanical drafting and Revit modeling, drawn from your engineer's design.

How a job runs

  1. Discovery and consultation

    A short conversation about the project, the deadline, the codes and what matters most to you. No obligation.

  2. Scope and onboarding

    You get a clear scope, timeline and price. We sign an NDA if you need one, set up secure file transfer and take on your Revit and CAD templates and layer standards.

  3. Engineering and modeling

    We do the design assist, calculations, drawings and Revit models, built to the codes of your region.

  4. Coordination and QA/QC

    We coordinate the trades in Navisworks and check the set against a QC list before it leaves us.

  5. Delivery and support

    You get clean, coordinated, permit-ready sheets on the agreed date, with quick turnaround on revisions.

Questions about mechanical support

Do you size equipment?

In the US and Canada we calculate loads, size ducts and ventilation, and prepare equipment schedules from the results. Your engineer selects and approves the equipment.

Can you start from a sketch?

Yes, as long as the intent and the code are clear. We will ask if anything is missing.

Reviewed by the SYMATEQ team. Last reviewed: 16 November 2026

Start a project

Have a project in mind?

Tell us the discipline, the code and the deadline. We reply with a price and a date, usually within one business day.

Used only to reply to you. Privacy